Asbestos List
Get Listed

Asbestos Testing Laboratories in Alexandria

Asbestos Testing Laboratories in Alexandria and surrounding areas of Sydney. 2 businesses currently listed.

Asbestos testing laboratories analyse bulk material samples and air samples to identify the presence, type, and concentration of asbestos fibres. In Australia, the Safe Work Australia Code of Practice recommends that sample analysis be performed by a NATA-accredited laboratory to ensure results meet ISO/IEC 17025 standards.

All asbestos work in Alexandria falls under New South Wales regulations, administered by SafeWork NSW - Asbestos. For full licensing and regulatory details, see our Asbestos Testing Laboratories in New South Wales page.

Confirm the lab holds NATA accreditation (Australia) or IANZ accreditation (New Zealand) for asbestos fibre identification before sending samples. Ask about turnaround times and whether they offer priority processing if you need results fast.

Legislation & Codes of Practice

Nearest asbestos disposal facilities to Alexandria

Licensed sites that accept asbestos waste. Check packaging rules and fees with the facility before you go.

All disposal facilities in this state →

Showing 1–2 of 2 results

WL

Work Science Laboratory

Alexandria, New South Wales

Asbestos ConsultantsOccupational Hygienists+2 moreBased in Alexandria

Work Science is an industry leader providing health, safety, risk management, and occupational hygiene consulting services with a NATA accredited labouratory supporting air monitoring, clearance, audit, survey, and sample identification services.

View Details
JL

JMB Environmental Consulting Pty Ltd

Alexandria, New South Wales

Asbestos ConsultantsOccupational Hygienists+1 moreBased in Alexandria

JMB Environmental Consulting provides environmental consulting services including mould and moisture assessment, indoor air quality testing, occupational hygiene, contaminated land assessment, and labouratory services.

View Details

Frequently Asked Questions

Do asbestos testing laboratories need to be accredited in New South Wales?
In New South Wales, as across Australia, asbestos identification should be done by a laboratory accredited by NATA (the National Association of Testing Authorities) to the ISO/IEC 17025 standard, so results are reliable and accepted by regulators. Sampling and analysis follow the Safe Work Australia code of practice referenced by SafeWork NSW.
How do I collect and send an asbestos sample in New South Wales?
Keep the suspect material damp, take a small piece into a sealed and labelled bag, and avoid sanding, drilling or breaking it. Note where in the building each sample came from so the lab can report on each material. If you are unsure how to sample safely, a NATA-accredited lab or a licensed assessor in New South Wales can collect it for you.
How long do asbestos test results take?
Most NATA-accredited laboratories can provide standard asbestos analysis results within 3-5 business days. Priority or urgent services are often available for an additional fee, with results typically returned within 24-48 hours.
What is NATA accreditation?
NATA is the National Association of Testing Authorities. When a lab is NATA-accredited under ISO/IEC 17025, it means they have been independently assessed and shown to use validated testing methods with proper quality controls. For asbestos analysis, this is the standard you should expect from any lab you use.
How are asbestos samples collected and tested?
A trained sampler wets the suspect material to keep fibres down, cuts or breaks off a small piece, and seals it in a labelled bag. At the lab, the sample is examined under polarised light microscopy (PLM). If the result is ambiguous, dispersion staining or transmission electron microscopy may be used. The report will say whether asbestos is present and name the fibre type, usually chrysotile, amosite, or crocidolite. For air monitoring, a membrane filter cassette is attached to a calibrated pump worn by a worker or placed in the area being tested. Fibres on the filter are then counted under a phase-contrast microscope using the NOHSC:3003 membrane filter method.

Related Categories

Asbestos ConsultantsOccupational Hygienists

Nearby Areas

CringilaBellambiBoronia ParkBlue HavenBroadwayBateau Bay

State Resources

Asbestos in New South Wales

Explore More

All Asbestos Testing LaboratoriesAsbestos Testing Laboratories in New South Wales

Is your business missing?

If your asbestos business operates in this area, add it to the directory for free.

Add Your Listing