Asbestos Businesses in Otago, New Zealand

Asbestos in New Zealand is governed by the Health and Safety at Work (Asbestos) Regulations 2016, made under the Health and Safety at Work Act 2015. WorkSafe New Zealand enforces the regulations nationally. Since 1 October 2016, importing asbestos-containing products into New Zealand has been illegal. The airborne contamination standard is 0.1 respirable asbestos fibres per millilitre of air averaged over eight hours.

Any Person Conducting a Business or Undertaking (PCBU) must identify asbestos at their workplace and eliminate exposure to airborne asbestos so far as is reasonably practicable. Buildings constructed before 1 January 2000 are presumed likely to contain asbestos. Where asbestos is identified or suspected, the PCBU must prepare and maintain a management plan covering the location and condition of all known or assumed asbestos-containing material, how exposure risks are managed, and procedures for incidents or emergencies. Plans must be reviewed at least every five years. Where multiple PCBUs share a workplace, they must consult, cooperate, and coordinate their asbestos management.

Unlike Australia, where each state has its own regulator and there is a push toward national consistency through ASSEA, New Zealand's asbestos regulations are already national. WorkSafe NZ is the single regulator across the whole country.

Licensing

All licensed asbestos removal requires a licence from WorkSafe:

  • Class A permits removal of any quantity of friable and non-friable asbestos. Nominated supervisors need at least three years of experience including a minimum of 600 days removing friable asbestos. The PCBU must have a certified safety management system, and an independent assessor must do air monitoring and issue clearance certificates.
  • Class B permits removal of more than 10 square metres of non-friable asbestos. Supervisors need at least one year of experience including 200 days of non-friable removal. Removing 10 square metres or less of non-friable asbestos by a competent person does not require a licence, but must still follow the regulations and Code of Practice.

Workers must hold the appropriate NZQA unit standard qualifications. All licensed work requires a removal control plan, decontamination facilities, and proper waste disposal. WorkSafe must be notified before licensed work begins. Samples must be analysed by a lab accredited by IANZ or NATA.

Disposal

Oamaru (Waitaki District): the Oamaru Transfer Station at 13 Industrial Place does not accept hazardous waste, including asbestos. Contact a licensed removalist or your council for disposal options.

Frequently Asked Questions

When is an asbestos licence required in Otago?
The 10 m² rule is the key test. Removing more than 10 m² of non-friable asbestos (counted over the whole project at the site) needs a Class B or Class A licence, and removing friable asbestos needs a Class A licence. Breaching the Class B requirement can bring a fine of up to $10,000 for an individual or $50,000 for any other person.
Can I take asbestos to the Oamaru transfer station?
No. The Oamaru Transfer Station (13 Industrial Place, run by Waste Management) does not accept hazardous waste, including asbestos. Asbestos must go to a licensed landfill, so contact a licensed removalist or your council for options.
How is asbestos testing handled for Otago properties?
A sample has to be analysed by a laboratory with IANZ accreditation, or by one WorkSafe has approved while it gains accreditation.
New ZealandOtago

Showing 1–4 of 4 results

Can't find what you're looking for?

List your business

Explore More