Asbestos Testing Laboratories in Northern Territory, Australia

Accredited labs that analyse asbestos samples.

In the Northern Territory, workplace asbestos is regulated by NT WorkSafe. A sample taken to find out whether a material contains asbestos may only be analysed by a NATA-accredited laboratory accredited for that test method, or by a laboratory approved or operated by the regulator.

Only a competent person should take the sample. It should be sealed in a container or a heavy-duty 200 µm polythene bag and labelled. Once the result comes back, the workplace's asbestos register must be updated.

Air monitoring during Class A removal work, and the clearance inspection afterwards, must be done by a licensed asbestos assessor.

Asbestos has been banned across Australia since 31 December 2003, so buildings in the Northern Territory built or renovated before then may still contain it.

Check a laboratory's NATA accreditation covers the test you need, such as identification in bulk samples or fibre counting, and ask about turnaround times.

Frequently Asked Questions

Do asbestos testing laboratories need to be accredited in Northern Territory?

In Northern Territory, as across Australia, asbestos identification should be done by a laboratory accredited by NATA (the National Association of Testing Authorities) to the ISO/IEC 17025 standard, so results are reliable and accepted by regulators. Sampling and analysis follow the Safe Work Australia code of practice referenced by NT WorkSafe.

How do I collect and send an asbestos sample in Northern Territory?

Keep the suspect material damp, take a small piece into a sealed and labelled bag, and avoid sanding, drilling or breaking it. Note where in the building each sample came from so the lab can report on each material. If you are unsure how to sample safely, a NATA-accredited lab or a licensed assessor in Northern Territory can collect it for you.

How long do asbestos test results take?

Most NATA-accredited laboratories can provide standard asbestos analysis results within 3-5 business days. Priority or urgent services are often available for an additional fee, with results typically returned within 24-48 hours.

What is NATA accreditation?

NATA is the National Association of Testing Authorities. When a lab is NATA-accredited under ISO/IEC 17025, it means they have been independently assessed and shown to use validated testing methods with proper quality controls. For asbestos analysis, this is the standard you should expect from any lab you use.

How are asbestos samples collected and tested?

A trained sampler wets the suspect material to keep fibres down, cuts or breaks off a small piece, and seals it in a labelled bag. At the lab, the sample is examined under polarised light microscopy (PLM). If the result is ambiguous, dispersion staining or transmission electron microscopy may be used. The report will say whether asbestos is present and name the fibre type, usually chrysotile, amosite, or crocidolite. For air monitoring, a membrane filter cassette is attached to a calibrated pump worn by a worker or placed in the area being tested. Fibres on the filter are then counted under a phase-contrast microscope using the NOHSC:3003 membrane filter method.

AustraliaNorthern TerritoryAsbestos Testing Laboratories

Showing 1–5 of 5 results

Agon Environmental Canberra

Turner, Australian Capital Territory

Asbestos Testing LaboratoriesAsbestos Consultants+1 more

Agon Environmental is a national environmental consultancy providing hazardous materials and site contamination advice for government, infrastructure, and development sectors, with services ranging from site assessments to waste management.

View Details

Asbestos Solutions NT

Berrimah, Northern Territory

Asbestos Testing LaboratoriesAsbestos Consultants+1 moreLocal

Asbestos Solutions NT are industry leaders in the safe removal of asbestos from domestic, commercial and industrial properties throughout the Northern Territory. They provide asbestos removal, testing, sampling, and auditing services with fully qualified and accredited staff.

View Details

Lintin Geotechnical

Holtze, Northern Territory

Asbestos Testing LaboratoriesLocal

Lintin Geotechnical is an asbestos testing labouratory based in Holtze, NT, Australia. The company specialises in asbestos analysis and environmental testing services, providing professional labouratory assessments to support compliance and safety requirements across Northern Territory projects and facilities.

View Details

Alice Materials Testing

Alice Springs, Northern Territory

Asbestos Testing LaboratoriesAsbestos ConsultantsLocal

Alice Materials Testing is an asbestos testing labouratory based in Alice Springs, NT, providing specialised analytical services for asbestos identification and environmental testing. The labouratory serves the local and regional community with professional material analysis and assessment capabilities.

View Details

Eurofins Environmental Testing Australia - Darwin

Darwin, Northern Territory

Asbestos Testing LaboratoriesAsbestos ConsultantsLocal

Eurofins Environmental Testing Australia operates an asbestos testing labouratory in Darwin, NT, providing comprehensive analysis and identification services for asbestos materials. The facility serves Northern Territory clients requiring professional labouratory testing and environmental compliance support for asbestos detection and assessment.

View Details

Can't find what you're looking for?

List your businessor

Related Categories

Asbestos Consultants Occupational Hygienists

State Resources

Asbestos in Northern Territory

Explore More

All Asbestos Testing Laboratories