Asbestos List
Get Listed

Occupational Hygienists in Alexandria

Occupational Hygienists in Alexandria and surrounding areas of Sydney. 2 businesses currently listed.

Occupational hygienists assess workplace exposure to hazardous substances, including airborne asbestos fibres. In the context of asbestos work, they conduct air monitoring during removal operations, perform background and clearance air sampling, and provide independent exposure assessments to ensure fibre levels remain below the workplace exposure standard of 0.1 fibres/mL.

All asbestos work in Alexandria falls under New South Wales regulations, administered by SafeWork NSW - Asbestos. For full licensing and regulatory details, see our Occupational Hygienists in New South Wales page.

Check they hold AIOH membership (Australia) or NZOHS membership (New Zealand) and that their lab is accredited for the fibre counting method they use. Ask what their clearance inspection process looks like.

Legislation & Codes of Practice

Nearest asbestos disposal facilities to Alexandria

Licensed sites that accept asbestos waste. Check packaging rules and fees with the facility before you go.

All disposal facilities in this state →

Showing 1–2 of 2 results

WL

Work Science Laboratory

Alexandria, New South Wales

Asbestos ConsultantsOccupational Hygienists+2 moreBased in Alexandria

Work Science is an industry leader providing health, safety, risk management, and occupational hygiene consulting services with a NATA accredited labouratory supporting air monitoring, clearance, audit, survey, and sample identification services.

View Details
JL

JMB Environmental Consulting Pty Ltd

Alexandria, New South Wales

Asbestos ConsultantsOccupational Hygienists+1 moreBased in Alexandria

JMB Environmental Consulting provides environmental consulting services including mould and moisture assessment, indoor air quality testing, occupational hygiene, contaminated land assessment, and labouratory services.

View Details

Frequently Asked Questions

When is air monitoring required during asbestos removal in New South Wales?
Air monitoring is required for Class A (friable) asbestos removal in New South Wales and across Australia, and is recommended for other higher-risk work. An occupational hygienist carries out control monitoring during the job and clearance monitoring afterwards to confirm fibre levels are below the exposure standard of 0.1 fibres per millilitre before an area is reoccupied. SafeWork NSW sets out the monitoring obligations.
What qualifications should an occupational hygienist hold in New South Wales?
Look for membership of the Australian Institute of Occupational Hygienists (AIOH) and a laboratory accredited for the fibre-counting method they use. On Class A work in New South Wales, clearance inspections and air monitoring must be carried out by a suitably licensed or competent person who is independent of the removalist.
What does an occupational hygienist do in asbestos work?
Their main job is measuring airborne asbestos fibre levels to make sure workers and nearby occupants are not being exposed beyond safe limits. The workplace exposure standard in both Australia and New Zealand is 0.1 fibres per millilitre of air, averaged over eight hours. A hygienist will run air monitoring before, during, and after removal work, then issue a clearance certificate once the area is safe to reoccupy. They also review the removalist's control measures and advise on safe work procedures.
When is air monitoring required during asbestos removal?
It is mandatory for all friable (Class A) removal in Australia and for all licensed removal work in New Zealand. For non-friable (Class B) work in Australia, it is required when a risk assessment suggests fibre levels could exceed the exposure standard. You also need monitoring before an enclosure is pulled down and before a clearance certificate can be signed off. The person doing the monitoring must be competent in the methods, which usually means a qualified hygienist using NATA-accredited (Australia) or IANZ-accredited (New Zealand) procedures.
What qualifications should an occupational hygienist hold?
In Australia, look for membership of the Australian Institute of Occupational Hygienists (AIOH). Full members have a relevant degree and demonstrated competence. Many also hold Certified Occupational Hygienist (COH) status through the AIOH certification scheme. In New Zealand, the NZ Occupational Hygiene Society (NZOHS) keeps a similar register. For asbestos air monitoring specifically, the hygienist or their lab should hold NATA accreditation (Australia) or IANZ accreditation (New Zealand) for the fibre counting methods they use.

Related Categories

Asbestos ConsultantsAsbestos Testing LaboratoriesAsbestos Removal

Nearby Areas

GuildfordBlue HavenEagle ValeBrookvaleChatswoodKirrawee

State Resources

Asbestos in New South Wales

Explore More

All Occupational HygienistsOccupational Hygienists in New South Wales

Is your business missing?

If your asbestos business operates in this area, add it to the directory for free.

Add Your Listing