Asbestos List
Get Listed

Asbestos Testing Laboratories in Perth

Asbestos Testing Laboratories in Perth and surrounding areas of Perth. 2 businesses currently listed.

Asbestos testing laboratories analyse bulk material samples and air samples to identify the presence, type, and concentration of asbestos fibres. In Australia, the Safe Work Australia Code of Practice recommends that sample analysis be performed by a NATA-accredited laboratory to ensure results meet ISO/IEC 17025 standards.

All asbestos work in Perth falls under Western Australian regulations, administered by WorkSafe WA - Asbestos. For full licensing and regulatory details, see our Asbestos Testing Laboratories in Western Australia page.

Confirm the lab holds NATA accreditation (Australia) or IANZ accreditation (New Zealand) for asbestos fibre identification before sending samples. Ask about turnaround times and whether they offer priority processing if you need results fast.

Nearest asbestos disposal facilities to Perth

Licensed sites that accept asbestos waste. Check packaging rules and fees with the facility before you go.

All disposal facilities in this state →

Showing 1–3 of 3 results

PP

Pro Asbestos Removal Perth

Perth, Western Australia

Asbestos Testing LaboratoriesAsbestos Consultants+1 moreBased in Perth

Pro Asbestos Removal Perth is a fully licensed Perth-based asbestos removal company specialising in the safe removal, testing, and disposal of asbestos-containing materials from residential and commercial properties.

View Details
AP

All Asbestos Removal Perth

Perth, Western Australia

Asbestos Testing LaboratoriesAsbestos Consultants+2 moreBased in Perth

Harris Asbestos Removal Perth is a specialist asbestos removal company that provides safe, professional removal and disposal of asbestos from residential, commercial, and industrial properties. They offer 24/7 emergency services and have been operating since 1998.

View Details
AR

Ascot Group Asbestos Removal

Ascot, Western Australia

Asbestos Testing LaboratoriesAsbestos Consultants+1 moreBased in Perth

An Aboriginal-owned construction and asbestos removal company based in Perth, Western Australia, providing licensed building and asbestos services throughout the Perth metro area and regional WA.

View Details

Frequently Asked Questions

Do asbestos testing laboratories need to be accredited in Western Australia?
In Western Australia, as across Australia, asbestos identification should be done by a laboratory accredited by NATA (the National Association of Testing Authorities) to the ISO/IEC 17025 standard, so results are reliable and accepted by regulators. Sampling and analysis follow the Safe Work Australia code of practice referenced by WorkSafe WA.
How do I collect and send an asbestos sample in Western Australia?
Keep the suspect material damp, take a small piece into a sealed and labelled bag, and avoid sanding, drilling or breaking it. Note where in the building each sample came from so the lab can report on each material. If you are unsure how to sample safely, a NATA-accredited lab or a licensed assessor in Western Australia can collect it for you.
How long do asbestos test results take?
Most NATA-accredited laboratories can provide standard asbestos analysis results within 3-5 business days. Priority or urgent services are often available for an additional fee, with results typically returned within 24-48 hours.
What is NATA accreditation?
NATA is the National Association of Testing Authorities. When a lab is NATA-accredited under ISO/IEC 17025, it means they have been independently assessed and shown to use validated testing methods with proper quality controls. For asbestos analysis, this is the standard you should expect from any lab you use.
How are asbestos samples collected and tested?
A trained sampler wets the suspect material to keep fibres down, cuts or breaks off a small piece, and seals it in a labelled bag. At the lab, the sample is examined under polarised light microscopy (PLM). If the result is ambiguous, dispersion staining or transmission electron microscopy may be used. The report will say whether asbestos is present and name the fibre type, usually chrysotile, amosite, or crocidolite. For air monitoring, a membrane filter cassette is attached to a calibrated pump worn by a worker or placed in the area being tested. Fibres on the filter are then counted under a phase-contrast microscope using the NOHSC:3003 membrane filter method.

Related Categories

Asbestos ConsultantsOccupational Hygienists

Nearby Areas

Bibra LakeCanning ValeWest PerthKings Park

State Resources

Asbestos in Western Australia

Explore More

All Asbestos Testing LaboratoriesAsbestos Testing Laboratories in Western Australia

Is your business missing?

If your asbestos business operates in this area, add it to the directory for free.

Add Your Listing